- Promise Vtrak Efd For Machine Learning
- Promise Vtrak Efd For Macro
- Promise Vtrak Efd For Mac Os
- Promise Vtrak M500i
The following is from Apple knowledge base article: http://support.apple.com/kb/HT1200
Summary
Configure Promise VTrak RAIDs for best performance using the guidelines in this article. These scripts are inteded to be used for Xsan and Quantum StorNext Deployments-For the Promise VTrak E5000 series, the scripted options below are now built into the Promise WebPAM PROe. Apple is targeting the Promise Vtrak E-Class RAID subsystem at Mac platforms running Mac OS X, Xsan 2 and Final Cut Studio 2. This is a very focused market with great potential that Promise has not sold into in the past to any great degree. Capacity mirror mac-pro pegasus-j2i software-raid disk-utility raid0 raid1 Category: Solutions for Mac Pro How to connect Pegasus32 to the Mac Pro and what performance can I expect for Pegasus32 R4, R6 and R8? Mac Reviews; Ultrabooks. Promise VTrak J300s. I assuming Promise either 1) gave you the SAS enclosure, for the review, or 2) 'lent' you the system for review. Either way, in my book, it. Hi Stefan, Thank you for choosing Promise Technology, Inc. For your storage needs. The 10.x firmware is for MAC version of VTrak unit and 3.x version is for the windows version of VTrak unit.
Configure Promise VTrak RAIDs for best performance using the guidelines in this article. Although Promise VTrak RAIDs may be manually configured, it is recommended that they be configured using the scripts described in this article. Both script and manual configuration steps are provided below.
Note: Xsan-specific configuration scripts configure Revertible Spare Drives. In the event that a drive is replaced, data will be migrated from the Spare Drive to the replacement drive. Performance may be impacted for the duration of the migration procedure.
Configure via script
A. Create the script file
Determine which script you should use from the following list, then click the linked article to get the text of the script. Follow the instructions in the linked article to save the script, then return to this article.
- RAID Controller: Xsan (Metadata and Data)
Configures a RAID Controller that will used as an Xsan volume. Configures arrays to be used as a metadata LUN and two data LUNs. Each Xsan volume must contain one metadata LUN. - RAID Controller: Xsan (Data Only)
Configures a RAID Controller that will used as an Xsan volume. Configures arrays to be used as two data LUNs and one Audio/Scratch LUN“. Use to configure additional data LUNs to an Xsan volume that already has a metadata LUN. - RAID Controllers and SAS-connected Expansion Chassis: Xsan (Metadata and Data)
Configures a RAID Controller and SAS-connected Expansion Chassis that will used as an Xsan volume. Configures arrays to be used as a metadata LUN, four data LUNs and one Audio/Scratch LUN. Each Xsan volume must contain one metadata LUN. - RAID Controllers and SAS-connected Expansion Chassis: Xsan (Data Only)
Configures a RAID Controller and SAS-connected Expansion Chassis that will used as an Xsan volume. Configures arrays to be used as as four data LUNs and two Audio/Scratch LUNs. Use to configure additional data LUNs to an Xsan volume that already has a metadata LUN. - RAID Controllers: Direct Attached
Configures a RAID Controller that will be formatted as a local filesystem such as Mac OS Extended (Journaled) to be accessed by a single computer. - RAID Controllers and SAS-connected Expansion Chassis: Direct Attached
Configures a RAID Controller and SAS-connected Expansion Chassis that will be formatted as a local filesystem such as Mac OS Extended (Journaled) to be accessed by a single computer. - RAID Controllers - 8-Drive Model - Direct Attached
Configures an 8-Drive RAID Controller that will be formatted as a local filesystem such as Mac OS Extended (Journaled) to be accessed by a single computer. - RAID Controllers - 8-Drive Model - Direct Attached with Spares
Configures an 8-Drive RAID Controller that will be formatted as a local filesystem such as Mac OS Extended (Journaled) to be accessed by a single computer. Spare drive is configured to offer higher availablility at the expense of performance. - Controller Module-Only
If your Promise VTrak's Controller Module has been replaced, apply this script to configure the replacement Controller Module for optimal performance.
B. Make drives available for configuration
- Connect to the VTrak RAID via the WebPAM PROe administration tool. If you are not certain what IP Address is assigned to the Promise RAID, refer to the Product Manual. If an alert appears in your Web browser, see this article.
- Authenticate when prompted. If you are not certain what administrator name and password is assigned to the Promise RAID, refer to the Product Manual.
Note: The scripts assume that there are no existing Disk Arrays or Spare Drives configured on the VTrak RAID. Before importing a script, you should delete all existing Disk Array or Spare Drive configurations. Important: Deleting existing Disk Arrays will destroy all existing data on the Disk Array. Ensure that all data has been backed up to an alternate storage device before proceeeding.
To delete existing Disk Arrays
- Select Disk Arrays.
- Click the Delete tab.
- Click (check) the first checkbox under Delete Disk Arrays, which will auto-select all existing arrays in the list.
- Click Submit and then enter CONFIRM in the dialog box.
To delete existing Spare Drives
- Select Spare Drives.
- Click the Delete tab.
- Click (check) the first checkbox under Delete Spare Drives, which will auto-select all existing arrays in the list.
- Click Submit and then enter CONFIRM in the dialog box
C. Import the configuration script
- Connect to the VTrak RAID via the WebPAM PROe administration tool. If you are not certain what IP Address is assigned to the Promise RAID, refer to the Product Manual. If an alert appears in your Web browser, see this article.
- Authenticate when prompted. If you are not certain what administrator name and password is assigned to the Promise RAID, refer to the Product Manual.
- Select Administrative Tools.
- Click the Import tab.
- Set the Type field to 'Configuration Script'.
- Populate the Local File Name field with the path to the script, or click the Browse button and select the script you saved previously.
- Click Submit.
- The next page that appears reports if the script was located and if it contains any issues. If there are no error messages, click Next.
This completes the Disk Array and Spare Drive configuration.
Manual configuration
Promise Vtrak Efd For Machine Learning
The following are instructions for manually configuring Promise VTrak RAIDs for best performance. You do not need to follow these steps if you used the configuration script method described above.
1. Connect to the VTrak RAID via the WebPAM PROe administration tool. If you are not certain what IP Address is assigned to the Promise RAID, refer to the Product Manual. If an alert appears in your Web browser, see this article.
2. Authenticate when prompted. If you are not certain what administrator name and password is assigned to the Promise RAID, refer to the Product Manual.
Make drives available for configuration
Note: The scripts assume that there are no existing Disk Arrays or Spare Drives configured on the VTrak RAID. Before importing a script, you should delete all existing Disk Array or Spare Drive configurations. Important: Deleting existing Disk Arrays will destroy all existing data on the Disk Array. Ensure that all data has been backed up to an alternate storage device before proceeeding.
To delete existing Disk Arrays
- Select Disk Arrays.
- Click the Delete tab.
- Click (check) the first checkbox under Delete Disk Arrays, which will auto-select all existing arrays in the list.
- Click Submit and then enter CONFIRM in the dialog box.
To delete existing Spare Drives
- Select Spare Drives
- Click the Delete tab.
- Click (check) the first checkbox under Delete Spare Drives, which will auto-select all existing arrays in the list.
- Click Submit and then enter CONFIRM in the dialog box.
Configure global settings
Promise Vtrak Efd For Macro
- Choose Controllers > Controller 1 > Settings.
- Check the 'Enable LUN Affinity' checkbox.
- Check 'Adaptive Writeback Cache'.
- Uncheck (deselect) 'Host Cache Flushing'.
- Check 'Forced Read Ahead'.
- Click Submit.
- Repeat these steps for Controller 2.
Configure Disk Arrays
Notes:
- Xsan only supports sector values of 512 Bytes.
- When creating Disk Arrays, attempt to assign an equal amount of hard drives to each Controller module by alternating each Disk Array’s Preferred Controller ID value between Controller 1 and Controller 2.
- All settings not described in the following steps should be left at default values.
- The 'Stripe' value should be left at 64KB and the 'Sector' value should be left at 512 Bytes.
Configuring a Two-Drive Xsan Metadata Disk Array
- Select Disk Arrays.
- Click the Create tab.
- Select 'Advanced Configuration'.
- Click Next.
- Assign a Disk Array Alias.
- Check Enable PDM and Enable Media Patrol.
- Select two disks. Note: If the Promise VTrak contains Serial Attached Storage (SAS) drives, it is suggested that these be used to store Xsan metadata.
- Click Next.
- Assign an Alias name.
- Select RAID Level 1.
- Set Readpolicy to ReadCache.
- Set WritePolicy to WriteThru.
- Set Preferred Controller ID either 1 or 2.
- Click Submit.
Configuring a Six-Drive Xsan Data Disk Array
- Select Disk Arrays.
- Click the Create tab.
- Select 'Advanced Configuration'.
- Click Next.
- Assign a Disk Array Alias.
- Check Enable PDM and Enable Media Patrol.
- Select six disks.
- Click Next.
- Assign an Alias name.
- Select RAID Level 5.
- Set Readpolicy to ReadAhead.
- Set WritePolicy to WriteBack.
- Set Preferred Controller ID either 1 or 2.
- Click Submit.
Configuring an Eight-Drive Direct-Attached Disk Array
- Select Disk Arrays.
- Click the Create tab.
- Select 'Advanced Configuration'.
- Click Next.
- Assign a Disk Array Alias.
- Check Enable PDM and Enable Media Patrol.
- Select eight disks.
- Click Next.
- Assign an Alias name.
- Select RAID Level 5.
- Set Readpolicy to ReadAhead.
- Set WritePolicy to WriteBack.
- Set Preferred Controller ID either 1 or 2.
- Click Submit.
The disk should now be visible in Disk Utility, which can be used to format the drive with a local filesystem such as Mac OS Extended (Journaled).
Configuring Spare Drives
Note: If your workflow requires consistent performance during RAID Drive downtime, it is advised that Spare Drives be configured.
Promise Vtrak Efd For Mac Os
- Select Spare Drives.
- Click the Create tab.
- Set Spare Type to Global if the Spare Drive is available to all Disk Arrays or select Dedicated is the Spare Drive is available to a specific Disk Array.
- Check Revertible if you would like data to be migrated from the Spare Drive to a replacement drive. (Performance may be impacted for the duration of the migration procedure.)
- Select the Physical Drive(s) that will be configured as Spare Drives.
- If the Spare Type is Dedicated, select to which Disk Array the Spare Drive is dedicated.
- Click Submit.
Frequently Asked Questions:
Promise VTrak E-Class RAID Subsystems
and OS X, Xsan 2 and Final Cut 2
Q: What did Apple and Promise Announce recently?
A: On the 19th of February 2008, Apple announced their Xsan 2 product, and as a part of that announcement stated “For the first time, Xsan 2 has been qualified with third-party RAID storage hardware from Promise Technology in configurations tuned and optimized for Xsan, Mac OS X Server and Apple’s professional applications”.
At the same time, Promise announced support for Apple’s newest OS X version, Leopard, OS X 10.5.2, Apple hardware (Xserve and Mac Pro systems) and Final Cut 2 application software on specific models and configurations of the VTrak E-Class RAID subsystems and storage expansion enclosures.
This support from Promise VTrak systems is available on limited configurations when purchased through Apple or Apple authorized sales channels.
Q: Which configurations are supported?
A: For specific configurations, part numbers and pricing sold through the Apple channels and supported by Promise and Apple visit the Apple Store at:
http://store.apple.com/Apple/WebObjects/BizCustom?qprm=78313&node=home/shop_mac/mac_accessories/promise
The hardware configurations of the VTrak E-Class RAID subsystem and expansion enclosures are limited to the dual controller Fibre Channel subsystems with 2GB cache memory and dual controller SAS expansion chassis.
Q: What’s so special about these limited configurations?
A: The configurations listed on the Apple Store have a different firmware version that has been well tuned for Apple hardware, Mac OS X Server, Xsan 2 and Final Cut 2 professional applications software and rigorously tested by Apple and Promise for performance, compatibility and outstanding reliability.
Q: Are there any other configurations or models of VTrak RAID storage subsystems supported for Apple applications by Promise or Apple?
A: No
Q: Where can I buy these specific configurations?
A: These specific configurations can ONLY be purchased through Apple and Apple approved sales channels worldwide. Promise does not sell these specific configurations through any other channels.
http://store.apple.com/Apple/WebObjects/BizCustom?qprm=78313&node=home/shop_mac/mac_accessories/promise
Q: Would Promise or Apple provide after sales support if I buy ANY Promise VTrak RAID subsystem from anywhere else other than Apple sales channels, configure it with my own choice of disk drives and then connect to Apple Mac Pro and Xserve products?
A: No.
Q: Promise has had a very successful business selling VTrak E-Class RAID subsystems into Windows and Linux markets for several years. How will the relationship with Apple impact Promise’s business there?
A: Storage customers in all markets will benefit:
Apple is targeting the Promise Vtrak E-Class RAID subsystem at Mac platforms running Mac OS X, Xsan 2 and Final Cut Studio 2. This is a very focused market with great potential that Promise has not sold into in the past to any great degree. Apple is helping Promise extend its reach by offering an Apple qualified VTrak E-Class RAID subsystem to Mac Pro (and Xserve) users running OS X (10.5.2 or later).
Promise will continue to meet the needs of demanding storage environments in Windows and Linux environments built around industry standard open architecture hardware as we have done successfully for many years. Only now, we will do it knowing the VTrak E-Class has been tested and qualified by one of the world’s leading IT companies, one synonymous with quality, performance, reliability and ease of use.
Apple customers running OS X, Xsan 2 and Final Cut on Mac Pro and Xserve platforms now have access to next generation storage with dual ported 4Gb FC connectivity to the host, dual controller, active/active, failover/failback capabilities, terrific performance and scalability to 32 drives. Everyone wins.
Q: So if I just buy the components of an Apple Qualified configuration on the open market, and assemble it myself neither Apple nor Promise will support it?
A: That is correct.
Promise Vtrak M500i
Q: Do Apple-integrated configurations support Windows or Linux-based network clients?
A: Yes.
Q: Are Apple-integrated configurations supported on PC based installs running Windows and Linux up to 4 JBODs for up to 80 spindles?
A: Yes
Q: Are Apple-integrated configurations supported on Mac OS X 10.5.2 with up to 4 JBOD Expansion Chassis for up to 80 spindles?
A: The currently supported configurations are based on the hardware platforms that Apple and Promise have focused their tested for optimal performance, compatibility and reliability in the demanding environments supported by Mac OS X, Xsan 2 and final Cut Studio 2. Those hardware platforms are currently based on a series of fully configured and tested Promise VTrak E-Class RAID subsystems and a single VTrak expansion chassis. No additional expansion is supported at this time on Mac platforms.
Q: If I need more information who can I call?
A: Promise pre-and post-sales support resources are available 24x7 to answer your questions. For Pre-sales questions, feel free to contact Promise at 1-800-888-0245, option 2.
If you have questions before you buy your VTrak E-Class RAID subsystem from Apple, you can also utilize web-based support from Promise, by following the procedure listed below.
• Visit the Promise Support center at https://support.promise.com.
• If you are a new user please register as a “New User” and then login.
• If you are a repeat user please log-in using your user name and the pass word
• Select “click here” once you are in the “Support Center” page and the general support form page will appear.
• Select “Pre sales questions”
• Type in your question and then submit
• Someone from the Promise Sales Support team will soon contact you via email and/or phone
If you have post-sales technical support questions you can also reach Promise at 1-800-888-0245 and then select option 8 to be directed to our Tech Support Team, or you can submit your question over the web by following the procedure listed below for Promise’s web-based support, available at https://support.promise.com.
• Visit the Promise Support center at https://support.promise.com.
• If you are a new user please register as a “New User” and then login.
• If you are a repeat user please log-in using your user name and the pass word
• Select “click here” once you are in the “Support Center” page and the general support form page will appear.
• Register your product using the link in the top banner and follow the instructions and complete registration
• Click on the link “Open Web Support” in the top banner and proceed to the link “Web Support Online Form” and follow further instructions.
• A Promise Technical Support representative will soon contact you email and / or phone.
Promise can be reached at 1-408-228-1400 or toll free at 1-800-888-0245. If you need pre-sales assistance, select option 2. For post sales technical support, select option 8.
We can also be reached on the web at https://support.promise.com.
Comments are closed.